Send a fax using monitor dialing
Monitor dialing allows you to dial a number from the printer control panel as you would dial a regular
telephone. When you send a fax using monitor dialing, you can hear the dial tones, telephone
prompts, or other sounds through the speakers on the printer. This enables you to respond to
prompts while dialing, as well as control the pace of your dialing.
TIP: If you are using a calling card and do not enter your PIN fast enough, the printer might start
sending fax tones too soon and cause your PIN not to be recognized by the calling card service. If
this is the case, you can create a speed dial entry to store the PIN for your calling card. For more
information, see Set up speed-dial entries on page 70.
NOTE: Make sure the volume is turned on to hear a dial tone.
58 Chapter 5 Fax
ENWW
To send a fax using monitor dialing from the printer control panel
1.
Load your originals. For additional information, see Load an original on the scanner glass
on page 14 or Load an original in the automatic document feeder (ADF) on page 15.
2.
Touch Fax, and then touch Black or Color.
If the printer detects an original loaded in the automatic document feeder, you hear a dial tone.
3.
When you hear the dial tone, enter the number by using the keypad on the printer control panel.
4.
Follow any prompts that might occur.
TIP: If you are using a calling card to send a fax and you have your calling card PIN stored as
a speed dial, when prompted to enter your PIN, touch (Speed dial) to select the speed dial
entry where you have your PIN stored.
Your fax is sent when the receiving fax machine answers.