Load an original in the automatic document feeder (ADF)
You can copy, scan, or fax a document by placing it in the automatic document feeder (ADF).
CAUTION: Do not load photos in the ADF; this might cause damage to your photos. Use only paper
that is supported by the printer. For more information, see Tips for selecting and using paper
on page 13.
NOTE: Only single-sided documents can be scanned, copied, or faxed using the ADF. The ADF
does not support double-sided documents.
NOTE: B-size documents cannot be scanned, copied, or faxed using the ADF.
NOTE: Some features, such as the Fit to Page copy feature, do not work when you load your
originals in the ADF. You must load your originals on the scanner glass.
To load an original in the ADF
Use these steps to load a document in the ADF.
1.
Load your original print-side up into the ADF.
a.
If you are loading an original printed in portrait orientation, place the pages so that the top
edge of the document goes in first. If you are loading an original printed in landscape
orientation, place the pages so that the left edge of the document goes in first.
b.
Slide the paper into the ADF until you hear a tone or see a message on the display
indicating that the loaded pages were detected.
TIP: For more help on loading originals in the ADF, refer to the diagram engraved in the
document feeder tray.
2.
Slide the paper guides inward until they stop at the left and right edges of the paper.
ENWW
Load an original in the automatic document feeder (ADF) 15