Load cards and photo paper
Use these instructions to load cards and photo paper.
1.
Lift the output tray.
2.
Slide out the paper width guide in the input tray as far as possible.
NOTE: If you are loading larger-size paper, pull up the front edge of the input tray to extend it.
3.
Insert the paper print-side down in the tray.
Make sure the stack of paper is inserted as far inside the printer as possible and does not
exceed the line marking in the tray. If the photo paper has a tab along one edge, make sure the
tab is pointing towards the front of the printer.
NOTE: Do not load paper while the printer is printing.
4.
Slide the paper guides in the tray until they touch the edge of the stack of paper.
5.
Lower the output tray.
ENWW
Load paper 17
6.
Pull out the output tray extension.