Load custom-size paper
Use these instructions to load custom-size paper.
CAUTION: Use only custom-size paper that is supported by the printer. For more information, see
Paper specifications on page 167.
1.
Lift the output tray.
2.
Slide the paper width guide out as far as possible.
NOTE: If you are loading larger-size paper, pull up the front edge of the input tray to extend it.
3.
Insert the paper print-side down in the tray.
Make sure the stack of paper is inserted as far inside the printer as possible and does not
exceed the line marking in the tray.
NOTE: Do not load paper while the printer is printing.
4.
Slide the paper guides in the tray until they touch the edge of the stack of paper.
5.
Lower the output tray.
6.
Pull out the output tray extension.
18 Chapter 1 Get started
ENWW