The printer is having problems sending a manual fax
NOTE: This possible solution applies only in the countries/regions that receive a 2-wire phone cord
in the box with the printer, including: Argentina, Australia, Brazil, Canada, Chile, China, Colombia,
Greece, India, Indonesia, Ireland, Japan, Korea, Latin America, Malaysia, Mexico, Philippines,
Poland, Portugal, Russia, Saudi Arabia, Singapore, Spain, Taiwan, Thailand, USA, Venezuela, and
Vietnam.
●
Make sure the telephone you use to initiate the fax call is connected directly to the printer. To
send a fax manually, the telephone must be connected directly to the port labeled 2-EXT on the
printer, as shown in the illustration.
1
Telephone wall jack
2
Use the phone cord supplied in the box with the printer to connect to the "1-LINE" port
3
Telephone
●
If you are sending a fax manually from your phone that is connected directly to the printer, you
must use the keypad on the telephone to send the fax. You cannot use the keypad on the printer
control panel.
NOTE: If using a serial-type phone system, connect your phone directly on top of the printer
cable which has a wall plug attached to it.